MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Looking for a Pentacon (Meyers..) 300mm F4 lens mount for P6
Ver tema anterior :: Ver tema siguiente  


Reply

Hello everyone, I joined to ask this question...
I have one of the 300mm f4.5 Pentacon (Meyer Orestegor 300mm F4) teles with the M42 mount and I'd like to use it on my Pentax K200D. Now, I know I can get it to work with an M42-K adapter, but I have to press the manual stop-down button. Since I want to use this on a gunstock mount with electronic trigger, I'd have to use in in Aperture priority mode. The means that I'd have to ensure that the body contacts are shorted out.
Therefore, I'm looking for the Pentacon-Six mount for the 300mm f4, so I can use a P6 -> K mount adapter so I can rig it to short the contacts and have an easier to use, more secure connection to the camera body.
Does anyone have one of these mounts they could part with to help a guy out?

I have also posted in the thread where these lenses are discussed/shown: http://forum.mflenses.com/viewtopic,p,121289.html#121289


Reply

Do you need to short out the contacts ?

I have been using both the flanged and original Pentax M42 adapters on a K100D and Av mode works just fine as far as I can tell, with Meyer 300/4.5 and 400/5.5.

That, or I have been screwing up for the last 13 months, which is certainly possible.


Reply

Yes, I need to short out the contacts so Aperture Priority mode will work properly (meter reads unpredictably otherwise...). Did you find any problems focusing to infinity on the 300mm f4 with the flanged variety of adapters? I know I can use the "Green Button" to do stop-down metering, but it means I cannot use my homebuilt electronic trigger grip.
Did the flanged adapters you used look like this?
Haz clic aquí para verlo en eBay


Reply

Hi Kaj,

Yes, they look like that. My Meyers are actually Exakta-mounts but I adapted these adapters to work, so as far as the shorting goes I have the same situation as you.

I have a different infinity focus problem than you do because of the Exakta mounts on mine. My 300/4.5 gets to 50m, but I adjusted infinity focus on the 400/5.5 so that one gets infinity.


Reply

luisalegria escribió:

My 300/4.5 gets to 50m, but I adjusted infinity focus on the 400/5.5 so that one gets infinity.

Any suggestions on how to get my Meyer 300 f/4.0 adjusted to infinity?


Reply

I haven't seen that one.

The Meyer 400 can be adjusted by just loosening the setscrews on the focus ring and rotating the ring 1/3 back from infinity. When you screw the setscrews back in you can turn it 1/3 turn more. Viola infinity.

You can't do that on the Meyer 300/4.5


Reply

Well, since I've found it's impossible to shift the infinity focus backwards (to compensate for an adapter) I've decided to make to with a normal adapter for a while... and eventually I will use an adapter with the flange and have part of the rear lens mount machined down to make up for the difference in thickness. This way the lens will focus to infinity. It will still work on m42 bodies, but will focus slightly past infinity *shrug* oh well....