| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
spiralcity
 Registrado: 02 Oct 2008 Mensajes: 1207 Ubicación: Chicago, U.S.A
|
 Publicado: Jue Feb 12, 2009 7:05 am Asunto: Pentacon 50mm 1.8 HELP!!!!! |
|
 Publicado: Jue Feb 12, 2009 7:05 am Asunto: Pentacon 50mm 1.8 HELP!!!!! |
|
|
spiralcity wrote:
Can someone help me fix my Pentacon?
The diaphram is stuck wide open, if anyone likes to tinker with lenses I would be more than happy to ship it to you for a repair. no need to worry about screwing it up, it's already screwed!
Drop me a PM ,PLEASE!
Thanks,
Kevin |
|
| Volver arriba |
|
 |
Olivier
 Registrado: 18 Feb 2009 Mensajes: 5097 Ubicación: France
Expire: 2015-08-06
|
 Publicado: Jue Feb 19, 2009 11:04 pm Asunto: |
|
 Publicado: Jue Feb 19, 2009 11:04 pm Asunto: |
|
|
Olivier wrote:
I have the same problem...
So if anybody could help in this topic, it would be really fine.
May be the diaphragm needs to be cleaned ?
Thanks.
Olivier _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Volver arriba |
|
 |
rawhead
 Registrado: 09 Feb 2009 Mensajes: 1525 Ubicación: Boston, MA
Expire: 2014-04-29
|
 Publicado: Jue Feb 19, 2009 11:21 pm Asunto: |
|
 Publicado: Jue Feb 19, 2009 11:21 pm Asunto: |
|
|
rawhead wrote:
Does switching the A/M switch and depressing the aperture pin have any effect?
One of my Pentacons had an issue where it would not stop down past f8; turned out to be a worn out plastic part of the A/M switch that just wasn't pressing on the aperture mechanism hard enough. So what I did was opened the back, and took off the spring on the pin mechanism. Now, the A/M switch is completely disfunctional, but I have a fully manual and functional aperture blades that stop all the way down to f16. |
|
| Volver arriba |
|
 |
spiralcity
 Registrado: 02 Oct 2008 Mensajes: 1207 Ubicación: Chicago, U.S.A
|
 Publicado: Vie Feb 20, 2009 5:58 am Asunto: |
|
 Publicado: Vie Feb 20, 2009 5:58 am Asunto: |
|
|
spiralcity wrote:
Im sending mine in to a repair shop. Gonna cost me 55.00 USD! The lens isnt even worth that much, but im fixing it just the same.  |
|
| Volver arriba |
|
 |
hk300
 Registrado: 30 Oct 2008 Mensajes: 1041 Ubicación: Hong Kong
|
 Publicado: Vie Feb 20, 2009 6:14 am Asunto: |
|
 Publicado: Vie Feb 20, 2009 6:14 am Asunto: |
|
|
hk300 wrote:
| spiralcity escribió: |
Im sending mine in to a repair shop. Gonna cost me 55.00 USD! The lens isnt even worth that much, but im fixing it just the same.  |
55 usd! that is too much!
Try to buy another one from a member and sell yours. _________________ No longer member , please don't try to contact to him |
|
| Volver arriba |
|
 |
rawhead
 Registrado: 09 Feb 2009 Mensajes: 1525 Ubicación: Boston, MA
Expire: 2014-04-29
|
 Publicado: Vie Feb 20, 2009 8:02 am Asunto: |
|
 Publicado: Vie Feb 20, 2009 8:02 am Asunto: |
|
|
rawhead wrote:
Definitely buy another one!! They're dime a dozen!!
Haz clic aquí para verlo en eBay
You will have money left over, and with the broken one, you can use to take it apart and learn about its innards  |
|
| Volver arriba |
|
 |
edumad
 Registrado: 11 Feb 2009 Mensajes: 348 Ubicación: Esposende, Portugal
|
 Publicado: Vie Feb 20, 2009 1:42 pm Asunto: |
|
 Publicado: Vie Feb 20, 2009 1:42 pm Asunto: |
|
|
edumad wrote:
It might be oil that got into the diaphragm.
I'm seeing this in a chinon 135mm and in a tokina (its getting slow moving the blades). I found the spring in the chinon was not very strong and it would not move the blades because of the viscosity of the grease between the blades.
Lets hope someone close to you volunteers. If not, buy another one, cuz the shipping will probably be thereabouts... _________________ TWAPSI - The World As Photography Sees It |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|