MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Anyone replaced electrolytic capacitors to a 70-s SLR?
Ver tema anterior :: Ver tema siguiente  


Reply

I have this 1 € Japanese SLR with defect shutter: mechanical things work and also metering. But the solenoid that controls the latter curtain just doesn't work properly.

This is my deduction, I don't have the equipment to actually test the circuitry: Electrolytic capacitors from the 70's and 80's are notorious for their aging. And since the circuitry is only 3 volts the solenoid must use some capacitor. So if I change all the capacitors (ok - that is not very easy because they might be all around the camera).

Any ideas / comments?

(just throw it away is not a new idea, I figured that out myself)


Reply

kansalliskala escribió:
And since the circuitry is only 3 volts the solenoid must use some capacitor. So if I change all the capacitors (ok - that is not very easy because they might be all around the camera).


I don't understand your logic.


Reply

You don't say the make of the camera. This is a very common problem with Minolta X models. These have two capacitors, one in the rewind crank area under the top cover, and the other easily accessible inside the baseplate. There's plenty of info on the web. For instance
http://twid.de/x700/#fixc

You can buy replacement Minolta memory capacitors from Micro Tools, but they don't look the same, so I'm not sure if they'll help in your case.
http://www.micro-tools.de/mm5/merchant.mvc?Screen=PROD&Store_Code=Eng&Product_Code=9581-4798-31