MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

digitalrokkor mount conversion?
Ver tema anterior :: Ver tema siguiente  


Reply

Does anyone have any experience with the DigitalRokkor mount conversions for Canon cameras?

http://digitalrokkor.altervista.org/

I tripped over this recently, and now the gears are turning... find a 20D or convert my old RebelXT, maybe embedding an AF confirm chip and putting in a Haoda screen.


Reply

Yes, I did. See

http://www.pbase.com/kkawakami/md_eos_flange

I only bought the first version of his item, the final mount does
not give your lens distance marker at the top, nor the lens is
firmly locked. It is usable, infinity focus is OK. I used it for 350D,
some sample photos are in my MINOLTA page, check one
directory up in my PBASE system if you are interested.


Reply

So I went for it, converting a cheap eBay 20D. Smile

I did the "type 2" version, which requires hacking up the body a little more than just replacing the mount, but allows unmodified Rokkors to attach.

The scale can be at the top when the lens is mounted, though you can turn the lens past that point about another 30deg. There is no lock for the lens, but the mount is quite snug, so I'm not too worried.

One *major* caution: His instructions for the type 2 installation have you removing the electrical contact support through the mount opening. This is destructive, you'll tear at least the flex circuit before you get the support out. Not a big deal if you don't plan on reversing the conversion, but if you do, this is bad. Smile It's also bad if you're planning on tucking an AF-confirm chip in there, which I was. Now I need to open the camera up much further to find the other end of that flex circuit.

I found a 20D parts manual on the web, so I can at least see how the bits go together. I'll take pictures of the process for posterity. Smile

-Zandr

PS: It didn't occur to me at the beginning of this process that now I need a Minolta body cap. Smile