| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Mié Oct 15, 2008 12:30 am Asunto: Folding camera lens collimation?! |
|
 Publicado: Mié Oct 15, 2008 12:30 am Asunto: Folding camera lens collimation?! |
|
|
Nesster wrote:
Can anyone explain or link me to some place that explains the geometry of a triplet lens? What I'm after is this: what do I adjust to collimate (set the infinity focus) correctly? _________________ -Jussi
Camera photos
Print Photographica
Editado por última vez por Nesster el Mié Oct 15, 2008 1:15 pm; editado 1 vez en total |
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Mié Oct 15, 2008 1:15 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 1:15 pm Asunto: |
|
|
Nesster wrote:
I should clarify: This is for a folding camera with front cell focus. I can't seem to get the front element back enough to get good infinity focus. I'm wondering about the two other elements, which direction to move them... for example, if I move the middle element out a tiny bit, will that help? _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
Xpres
 Registrado: 11 Dic 2007 Mensajes: 964 Ubicación: UK
Expire: 2014-10-28
|
 Publicado: Mié Oct 15, 2008 1:54 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 1:54 pm Asunto: |
|
|
Xpres wrote:
Was it working before you took it apart? And how are you checking infinity - ground glass & lupe?
Whenever I've put one of these back together I've never had to move the rear element from where it was - yet - but my feeling is it would need to be closer to the film plane. Is it a bellows camera or fixed? _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Mié Oct 15, 2008 2:02 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 2:02 pm Asunto: |
|
|
Nesster wrote:
Thanks, it's a Bessa I bellows, and never did get infinity but rather a couple of hundred yards. I arbitrarily unscrewed and re-screwed the front element, and 'checked' with film
I'm going to setup a proper testing rig, but want to collect a bit of knowledge beyond the front element before I do so. _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
peterqd
 Registrado: 28 Feb 2007 Mensajes: 7449 Ubicación: near High Wycombe, UK
Expire: 2014-01-04
|
 Publicado: Mié Oct 15, 2008 2:28 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 2:28 pm Asunto: |
|
|
peterqd wrote:
Could it be that the whole lens (and the front of the bellows) are being taken too far from the film when you open the camera? I don't think I'd want to adapt the lens before checking this aspect. _________________ Peter - Moderator |
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Mié Oct 15, 2008 2:41 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 2:41 pm Asunto: |
|
|
Nesster wrote:
Good point, though everything seems in order there.
Apparently there are more than 1 starting points for the front element threading, I figure I'll try the different starting points to see which if any screw in the furthest. _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
Sevo
 Registrado: 22 Ago 2008 Mensajes: 1189 Ubicación: Frankfurt, Germany
Expire: 2012-12-03
|
 Publicado: Mié Oct 15, 2008 2:54 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 2:54 pm Asunto: |
|
|
Sevo wrote:
The hinge and the supports are ok and not bent? And you are positive that you view the image in the right plane and have a infinite target?
Front cell focusing is not mutually exclusive with unit focusing - front cell "focusing" reduces the focal length.
I use a known good camera and lens (Nikon F2 with 55/3.5 and loupe finder) set to infinity as the collimation viewing instrument, and a developed piece of film with test pattern placed in the film plane as the test target. |
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Mié Oct 15, 2008 3:06 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 3:06 pm Asunto: |
|
|
Nesster wrote:
| Sevo escribió: |
I use a known good camera and lens (Nikon F2 with 55/3.5 and loupe finder) set to infinity as the collimation viewing instrument, and a developed piece of film with test pattern placed in the film plane as the test target. |
Oh cool, this is the opposite direction from Rick Oleson's http://members.tripod.com/rick_oleson/index-123.html "bringin infinity indoors" article... I like! _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Mié Oct 15, 2008 3:17 pm Asunto: |
|
 Publicado: Mié Oct 15, 2008 3:17 pm Asunto: |
|
|
Nesster wrote:
In looking at past photos, I'm thinking of the possibility that the film bends enough at 6x9 to mess with the focus... it seems that the photos with the 4.5x6 mask in are sharper. _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Sáb Oct 18, 2008 10:07 pm Asunto: |
|
 Publicado: Sáb Oct 18, 2008 10:07 pm Asunto: |
|
|
Nesster wrote:
| Sevo escribió: |
I use a known good camera and lens (Nikon F2 with 55/3.5 and loupe finder) set to infinity as the collimation viewing instrument, and a developed piece of film with test pattern placed in the film plane as the test target. |
This was brilliant, as I was all set to do it the other direction
Worked a treat on three cameras - the Bessa was the best to fix, the other two are of the very cheap lens variety with a red 'flag' infinity stop with the external protrusions. But I got to clean those lenses etc - I was converting my Certo Super Sport Dolly back to a lens from its stint as a pinhole camera. _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
Jesito
 Registrado: 24 Ago 2007 Mensajes: 5745 Ubicación: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Publicado: Dom Oct 19, 2008 3:35 am Asunto: |
|
 Publicado: Dom Oct 19, 2008 3:35 am Asunto: |
|
|
Jesito wrote:
There are a few collimator building articles on the net:
http://www.geocities.com/leafshooter/collimator.htm
http://www.kyphoto.com/classics/collimator.html
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Volver arriba |
|
 |
Xpres
 Registrado: 11 Dic 2007 Mensajes: 964 Ubicación: UK
Expire: 2014-10-28
|
 Publicado: Dom Oct 19, 2008 10:22 am Asunto: |
|
 Publicado: Dom Oct 19, 2008 10:22 am Asunto: |
|
|
Xpres wrote:
Good articles Jes - bookmarked, thanks.
For folders I've always used the ground glass and lupe method which I find very easy and effective. I haven't explored the other techniques - perhaps I will.  _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Lun Oct 27, 2008 10:55 am Asunto: |
|
 Publicado: Lun Oct 27, 2008 10:55 am Asunto: |
|
|
Nesster wrote:
Thank you again - the SLR method works great, it is a great joy to have the Bessa I work the way it was intended to...
large: http://farm4.static.flickr.com/3211/2973403463_d9ee6a6034_o.jpg
large: http://farm4.static.flickr.com/3240/2973403729_b0923fd00b_o.jpg
large: http://farm4.static.flickr.com/3193/2973403985_5da90482dc_o.jpg _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|