MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Need help with PK mount adapter...
Ver tema anterior :: Ver tema siguiente  


Reply

This was my first chipping of an adapter.
I'm using this on a Tamrom 500mm SP. Even though the lens is an Adaptall, it came with an intermediate PK mount adapter. So I bought a PK to 4/3 adapter to fit it in my Olympus E-510.

Now when I chipped the PK to 4/3 adapter I found out that the black lever on the PK side of the intermediate adapter hits the chip as shown in the pictures.

What's this lever for?
Can I saw it off? And glue it as if the lens was allways mounted?
Will it release the aperture mechanism on other lenses (The 500mm SP is fixed F8)?
I'll need this adapter to use on another PK mount lens too.
Thanks.



Editado por última vez por duartix el Lun Sep 22, 2008 3:45 pm; editado 1 vez en total


Reply

It's the apreture conrloling lever. Cuting it will disable a PK mount camera body to control the aperture.
I don't know it it could be took out in a way that the process is reversable (isf you want to sell the lens/adapter)


Reply

montecarlo escribió:
It's the apreture conrloling lever. Cuting it will disable a PK mount camera body to control the aperture.
I don't know it it could be took out in a way that the process is reversable (isf you want to sell the lens/adapter)

That was exactly my worry... If later I wanted to sell the lens where the adapter was it would loose some value, but alas, a co-worker with pretty clever hands (and little tools) just took out the lever, mounted the chipped adapter and put the lever back on.
Thanks.